What is the small peaked roof construction on the high side of a chimney called?

When it comes to chimneys, it's essential to have a good understanding of the various components and terminologies associated with them. One such feature is the small peaked roof construction found on the high side of a chimney. In this article, we will explore the name, benefits, and suitable conditions for this particular chimney feature.

I. The Name: What is the small peaked roof construction called?

The small peaked roof construction on the high side of a chimney is commonly referred to as a "chimney cricket" or a "chimney saddle." It is a triangular or trapezoidal structure that diverts water and debris away from the chimney.

II. Benefits of a chimney cricket or chimney saddle:

Enhanced water protection: The primary purpose of a chimney cricket is to prevent water from pooling around the chimney. By diverting water away, it minimizes the risk of leaks, water damage, and potential structural issues.
Debris management: The sloped design of a chimney cricket also helps in redirecting falling leaves, twigs, or other debris away from the chimney. This reduces the chances of blockages and ensures proper ventilation.
Increased

A roof is the uppermost part of a building whose main function is to enclose the space and to protect the same from the effects of weather elements such as rain, wind, sun, heat and snow.

Table of Contents

What is the construction of a roof?

The traditional or cut roof is essentially a roof cut and assembled on site using individual timber members.It is normally constructed using rafters and purlins. Hips and Valleys are constructed. The most common structure used is where there is a gable at both ends of the roof.

What is the difference between roof and roofing?

A roof is more than just the shingles. A roof includes (or at least should include) ventilation, insulation, an ice and water barrier, a felt underlayment, and then the shingles.

What is the meaning of roofing in building?

Roof, covering of the top of a building, serving to protect against rain, snow, sunlight, wind, and extremes of temperature. Roofs have been constructed in a wide variety of forms—flat, pitched, vaulted, domed, or in combinations—as dictated by technical, economic, or aesthetic considerations.

What is called roofing?

material used for making roofs: Slates, tiles, and shingles are roofing materials. the job or process of putting roofs on new buildings or repairing damaged roofs.

What is a beam in roofing?

A roof beam is a load-bearing member that is integral to the strength of the building. It supports the floor or roof above while adding integrity to the walls. In addition, it also supports joists, trusses and other roofing elements.

What is the difference between rafters and beams?

Rafters are designed to support the roof sheathing and usually follow the angle of the roof. With a flat roof, rafters are sometimes called roof joists. Beams are structural elements that are designed to carry vertical gravitational forces or horizontal loads.

Frequently Asked Questions

What is a roof beam called?

A rafter is defined as one of a series of sloped structural pieces (typically wooden beams) that extend from the hip or ridge to eave, wall plate, or downslope perimeter. They're designed to support the roof deck, shingles, and everything else that goes with the roof. Rafters are the traditional way to frame a roof.

What is under the roof?

Attic. The space under the roof. The attic must be ventilated to protect the roofing system against excessive heat in summer and warm moist air generated by the house in winter.

What is the term for roof support?

Rafter. Rafters make up the basic frame to support the incline and siding of your roof. These angled timbers hold up your roof deck and provide your roof cover's main support. They are often connected by crosswise beams.

What is meant by roof in construction?

A roof is the uppermost part of a building whose main function is to enclose the space and to protect the same from the effects of weather elements such as rain, wind, sun, heat and snow.

What is a roof between two buildings called?

Often a breezeway is a simple roof connecting two structures (such as a house and a garage); sometimes it can be much more like a tunnel with windows on either side.

What is a ridge pole in rafter framing?

A ridge beam is a structural member used to support the ends of the rafters at the ridge, transferring it's loads to posts or gable end walls. Ridge beams are required by code if the roof slope is less than 3 in 12 (IRC section R802. 3).

What is a ridge in construction?

The ridge is the upper line of the roof that joins the 2 roof pitches. It is the split line of rain waters. Ridge is also used for the wooden part, also called the ridge beam or the roofing element that covers and protect the ridge beam (also called ridge capping).

What is ridge depth?

Ridge Board - The ridge member is a 1- or 2-inch thick lumber and is 2 inches deeper than the depth of the rafters to permit full bearing at the angled rafter ends. Rafters are placed directly opposite each other across the ridge and are notched at the lower end to fit the exterior wall top plate.

FAQ

What is the top edge of the roof where rafters meet?: The highest point of a roof is its apex, it's also known as the peak or ridge. It is established from the point at which two sloping sides of the roof meet and is generally located in the center of the roof.
What is ridge in framing?: According to the National Roofing Contractors Association, the ridge is the “highest point on a roof, represented by a horizontal line where two roof areas intersect, running the length of the area.” In simpler terms, it is the peak of a structure's roof where the opposing planes of the roof meet.
What is a rafter in construction?: In the field of construction, rafters are a series of sloped structural pieces that will extend from a ridge area to the plate of a wall or an eave. They are used to support the load of the building, especially the roof area.
What is ridge in civil engineering?: a beam laid along the edge where two sloping sides of a roof meet at the top; provides an attachment for the upper ends of rafters. synonyms: ridgepole, rooftree. type of: beam. long thick piece of wood or metal or concrete, etc., used in construction.
What is it called where the roof meets?: Ridge. The ridge occurs at the meeting point between two sloped sections of the roof. This peak is heavily protected from moisture and carefully ventilated, and typically runs horizontally across the top of your structure.
What is the meaning of roof in construction?: A roof is the uppermost part of a building whose main function is to enclose the space and to protect the same from the effects of weather elements such as rain, wind, sun, heat and snow.
What is a roof of a building?: Roof, covering of the top of a building, serving to protect against rain, snow, sunlight, wind, and extremes of temperature. Roofs have been constructed in a wide variety of forms—flat, pitched, vaulted, domed, or in combinations—as dictated by technical, economic, or aesthetic considerations.
What is roofing system in construction?: A Roof System consists of roof rafters, purlins and sheeting panels which are specifically designed to install onto a planned or an existing substructure. The substructure is normally made of concrete or masonry.