Frequently Asked Questions

FAQ

How to choose colors for a bathroom remodel?

The best part is that you can use these rules whether you want to create a spa-like master bath or a statement powder room.

1. Follow the Color Wheel.
2. Always Pick Three Colors.
3. Mix Two Neutrals.
4. Go Organic.
5. Draw Inspiration From Your Home Interior.
6. Don't Use The Same Color More Than Thrice.
7. Don't Be Afraid of Dark Colors.

How do you redo tile around a bathtub?

Instructions

1. Waterproof and Prep Layout. Because a shower enclosure is a wet installation, you must waterproof the walls and the framing.
2. Apply Cement.
3. Apply Felt Paper.
4. Cut and Fit Backerboard.
5. Reinforce Corners.
6. Apply Caulk.
7. Locate Grout Line.
8. Apply Adhesive and Tiles.

Should tile be flush with tub?

Plan to extend the tile 2 or 3 in. beyond the tub and to leave at least a half tile along the wall if possible. Don't stop tile even with the end of the tub. This leaves the walls along the front of the tub vulnerable to water damage, and doesn't look as finished as tile extending to the floor.

How much does it cost to have a bathtub retiled?

It typically costs between $450 and $10,000 to retile a bathroom, with an average of $2,000 including labor. Licensed General Contractor, Architexture Home Center, Inc. Get quotes from up to 3 pros! Enter a zip below and get matched to top-rated pros near you.

How can I make my bathroom tile look expensive?

6 Budget Tile Tricks That Deliver a High-End Look

1. Run the tiles on an entire wall or up onto the ceiling.
2. Use tight spacing and a matching grout to create a solid-wall effect.
3. Pick an unusual color or mix of colors.
4. Go for a less common laying pattern.
5. Pair it with a more expensive material.
6. Mind your finished edges.

How do you finish the edge of a bathtub tile?

Using caulk, trim tile pieces and edging are three of the most popular and effective ways to finish tile edges. Caulking is the cheapest and easiest method for finishing tile edges.

How do you make an old fashioned bathroom look nice?

8 Ways to Spruce Up an Older Bathroom (Without Remodeling)

1. Update the fixtures.
2. Be purposeful about the artwork.
3. Paint the tiles.
4. Live it up.
5. Work with it.
6. Work with it, on a smaller scale.
7. Create a diversion.
8. Make it functional.

How do you renovate an old bathroom?

How to Remodel a Bathroom in 7 Steps

1. Remove Bathroom Fixtures.
2. Install the New Shower or Tub.
3. Lay the New Flooring.
4. Hang Drywall and Start Painting.
5. Install Cabinets and Vanity.
6. Update Lighting.
7. Hook Up the Plumbing.

How do you upgrade an outdated bathroom?

1. Paint the Walls. A fresh coat of paint will help your bathroom look clean and new.
2. Install Beadboard or Wainscoting.
3. Paint Vanity Cabinets.
4. Upgrade the Bath Fan.
5. Replace Your Showerhead, Faucet and Hardware.
6. Change Light Fixtures.
7. Clean and Paint Old Hardware.
8. Upgrade to Reusable Containers.

How can I make a cheap bathroom look expensive?

15 ways to make your bathroom look expensive

1. Stunning stone-effect tiles and wall panels.
2. Unique metal finishes.
3. Statement walls.
4. Luxurious lights for less.
5. Add a chair or statement stool.
6. Display your towels.
7. Minimalism and simplicity.
8. Freestanding bathtub.

What are the rules for bathroom wiring?

Bathrooms must have at least one 120-volt receptacle within 3 feet of the outside edge of each bathroom sink basin. Double bowl sinks can be served by a single receptacle between them. All receptacles must have GFCI protection and be served by a 20-amp circuit.

What are the requirements for bathroom outlets NEC?

The minimum requirement for outlet receptacles in a bathroom is one GFCI-protected receptacle served by a 20-amp circuit. This is a bare minimum, however, and most bathrooms will have at least two receptacles, and often as many of four or five. When considering bathroom receptacles, keep correct placement in mind.

How many electrical circuits are needed in a bathroom?

The Bottom Line

While older bathrooms were often served by one 15-amp circuit, a new or remodeled bathroom generally requires at least two circuits—a 15-amp or 20-amp general lighting circuit and a 20-amp outlet circuit. A third 20-amp circuit may be required to power the vent fan if it includes a heat lamp.

Is it against code to have a breaker box in a bathroom?

No, it's not permissible to install electrical conductors or equipment in damp or wet locations, including bathrooms. There's a federal law in place, National Electric Code Volume 70, that prohibits breakers, fuses, and disconnect switches from appearing in residential or hotel bathrooms.

How do you redo a bathroom on a tight budget?

1. Paint the Walls. A fresh coat of color in your bathroom can quickly add a lot of character and life.
2. Tile the Floors—or a Statement Wall. Getty Images.
3. Simplify Storage.
4. Upgrade Your Mirrors.
5. Refresh the Windows.
6. Highlight Your Bathroom Lighting.
7. Personalize Hardware on Cabinets.
8. Prioritize Your Bathroom Vanity.

How can I update my old bathroom cheaply?

Make Fresh Bathroom Updates Without a Renovation

1. Have Fun With Wallpaper. Photo by Ken Gutmaker.
2. Try a New Towel Rack. Photo by Dominic Blackmore/IPC Images.
3. Add a Tub Surround.
4. Create a Place for Two.
5. Save By Not Building In.
6. Add a Subway Wall.
7. Seek Out Salvaged Shutters.
8. Try a Mixed-Material Floor.

How can I save money on bathroom fixtures?

Q: Where can I cut corners to save money on DIY bathroom remodeling?

1. Install a bath surround instead of an expensive tile shower.
2. Leave the plumbing where it is and work with it instead of reworking the floor plan.
3. Consider refinishing the existing cabinetry instead of purchasing new pieces.
4. Reuse pieces if possible.

In what order do you remodel a bathroom?

How to Remodel a Bathroom in 7 Steps

1. Remove Bathroom Fixtures.
2. Install the New Shower or Tub.
3. Lay the New Flooring.
4. Hang Drywall and Start Painting.
5. Install Cabinets and Vanity.
6. Update Lighting.
7. Hook Up the Plumbing.

How to remodel a master bathroom

Is it hard to redo a bathtub?	Replacing an old bathtub with a new bathtub is a very difficult project. Much of the tile on the walls will be damaged during the removal. If the old tub is readily accessible, the project can move quickly.
How difficult is it to renovate a bathroom yourself?	Cosmetic or superficial remodels, such as adding a mirror, repainting walls or ceilings, or replacing the showerhead are easy tasks to do. But if you want to make the bathroom bigger, things start to get complicated: Even a simple enlargement of the room requires experience with drywall and flooring.
What is the hardest part of the bathroom renovation?	The hardest parts of a bathroom remodel are knowing where to start, planning and performing demolition, minimizing dust, visualizing the finish line, living with the inconvenience of not being able to use that bathroom, and managing the schedule. That's the quick answer.
How can I modernize my bathroom without remodeling it?	Updating a bathroom without replacing it is entirely possible. The least expensive way to make a big change is to declutter and clean, then paint walls a fresh color and introduce better storage. That done, even just a couple of new towels and a room scent can go a long way to creating a brand new look.
Is it hard to remodel a bathroom yourself?	Cosmetic or superficial remodels, such as adding a mirror, repainting walls or ceilings, or replacing the showerhead are easy tasks to do. But if you want to make the bathroom bigger, things start to get complicated: Even a simple enlargement of the room requires experience with drywall and flooring.
What are the hardest part of remodeling bathroom?	You have to know what building components need to be demolished and replaced before you begin reconstruction and which materials can remain. You will have to make judgment calls on things like studs in walls broken or cracked floor joists, water damaged subfloor, termite damage, and wood rot.
What do I need to know before remodeling a bathroom?	11 Things to Consider Before You Remodel Your Bathroom How Much Room Do You Need for a Half Bath? Design for Accessibility. Make Niches for Toiletries. The Right Height for Accessories. Amp Up the Wiring. Wake Up to a Warm Floor. Light a Vanity Right. Skip the Wallpaper.
Is DIY bathroom remodel worth it?	A: Considering that remodeling your bathroom yourself costs roughly half of what it would with hired professionals and the fact that you might learn valuable skills, if you have some skills to begin with and some time on your hands, DIY bathroom remodeling has all the appearances of being worth the effort.
Can I redo my shower myself?	Installing a shower is tough when you're building up your shower pan and covering walls with tile. While you can do this, most people will want to hire pros for this stage. However, installing a pre-fabricated shower stall may be practical for DIYers. Refinishing your tub/shower yourself can produce acceptable results.
What is the cheapest way to redo a bathroom shower?	If you're on a slim budget, then having an acrylic or fiberglass shower wall panel is most affordable than installing new tiles. Shower wall tiles are much expensive for both material and labor. It also takes longer hours for the personnel to finish tiling your entire shower wall and floor.
Is it cheaper to remodel a bathroom yourself?	Bottom line on DIY bathroom remodel Overall, you can save hundreds to thousands of dollars doing bathroom renovations on your own but be realistic about your skillset and plan carefully before you begin. For superficial or cosmetic upgrades, you may be able to do the job quickly.
How do you update an old bathroom shower?	8 DIY Fixes to Give Your Old Shower an Instant Makeover (Budget... Paint Your Tiles. Get Yourself a Shower Caddy. A New Shower Screen. Replace the Shower Head. Kill the Mould. Cover and Re-Surface Instead of Replace. Search for Low-Cost Substitutes. Refinish Your Tub Instead of Replacing it.
How hard is it to renovate a shower?	Installing a shower is tough when you're building up your shower pan and covering walls with tile. While you can do this, most people will want to hire pros for this stage. However, installing a pre-fabricated shower stall may be practical for DIYers. Refinishing your tub/shower yourself can produce acceptable results.
What is the cheapest way to redo bathroom floors?	5 Great Budget-Friendly Bathroom Flooring Options Standard Vinyl. Linoleum. Luxury Vinyl. Ceramic or Porcelain Tile. Concrete.
How much does it cost to redo the floor in a small bathroom?	Average Cost of Bathroom Flooring The cost of the bathroom flooring material falls in the range of $1.82 to $2.39 per square foot. The national average cost is around $2.10 per square foot. The total budget, which includes the materials and labor cost, runs between $11.36 and $17.34, with the average cost being $14.45.
What type of flooring is best for small bathroom?	Ceramic tiles Ceramic tiles are an easy favorite in bathrooms, especially on the floors. They're very water-resistant, easy to clean, and they're incredibly versatile, coming in essentially every shape or color.
How do you redo a bathroom floor without removing tile?	6 ways to upgrade your flooring without removing tiles Use Vinyl Flooring. Vinyl flooring is available in the form of luxury vinyl flooring and traditional vinyl flooring. Roll out Rugs and Carpets. Install Laminated Wooden Flooring. Opt for an Epoxy coating. Choose Artificial Grass. Just Clean the Tiles.
What is the easiest flooring to install in a small bathroom?	Vinyl is the easiest flooring to install in a bathroom. It is budget-friendly, durable and low maintenance. It comes in a variety of colors and designs. Ceramic tiles are budget-friendly and easy to install.

• Can you put a toilet next to a door?

  • Toilet Position - Never have a toilet positioned so that it is facing the door. The toilet should be positioned ninety degrees to the door or at least several feet away from the bathroom door.

• Should toilets face the door?
  • Tuck the toilet behind the door or place it to the side where it's not in full view when you open the bathroom door. When planning the position of your toilet, allow at least 20cm on either side for elbow room.

• Is it OK to have a bathroom door swing out?

  • Well, to put it simply, despite not appearing in any building regulations, all bathroom doors should swing inwards. And there are a number of very good reasons for this, which we'll get on to shortly. As you go about your daily life, you shouldn't ever encounter outward-swinging toilet doors.

• Where should toilets not be placed?

  • Vastu Shastra considers the Northwest or the west as the right position in the room for the toilet. Another favourable side of the room can be the southern side of the room. However, never go for having the toilet on the northeastern or eastern side of the room.

• What is partial bathroom renovation?

  • What is a partial bathroom renovation? It is exactly what it sounds like, a facelift with limited real construction. The Remodeling Pro can replace and upgrade your bathroom simply with new lighting, cabinets, flooring or accessories.

• How can I update my old bathroom without remodeling?

  • What is the easiest way to update a bathroom without remodeling? The simplest way to update a bathroom is with paint. Adding color will quickly transform a space. Another easy way is to replace textiles, including towels, bath rugs, or the shower curtain.

• How do you renovate an old bathroom on a budget?
  • 5 ways to renovate a bathroom on a budget
    1. Keep the same layout. Retaining the bathroom's existing size and ensuring that fixtures are kept in the same will instantly save on extra costs and time.
    2. Upcycle existing cabinetry.
    3. Invest in new fixtures and fittings.
    4. Rejuvenate your tiles.
    5. Don't forget lighting.
• How much does it cost to update a half bathroom?

  • Bathroom Remodel Cost by Type

    Type of Bathroom Remodel	Average Cost	Average Time
    Half-bath remodel	$2,000–$5,000	5–7 days
    Full bath remodel	$6,000–$15,000	10–14 days
    Primary bath remodel	$10,000–$30,000	15–25 days
    Wet room installation	$11,000–$18,000	10–30 days

• I want to learn how to do kitchen and bathroom remodeling

  • A home remodel may seem like a daunting task. We developed this helpful remodeling guide to help you plan for a kitchen or bath remodel.

• Is bathtub refinishing worth it?

  • Bathtub refinishing is worth the money if your tub is in good working condition. The reglazing process can remove surface imperfections, like scratches, shallow cracks, and stains. But if your tub is old, leaking, or full of mold, reglazing is just a waste of money. You'll have to buy a new tub soon anyway.

• How to redo bathroom in old wood

  • Dec 22, 2015 — Open shelving in a bathroom is not only a great way to store extra supplies but it provides visual aesthetic, especially in a small space. Using 

• How can I renovate my bathroom without removing tiles?
  • 5 IDEAS TO RENOVATE YOUR BATHROOM WITHOUT REMOVING TILES
    1. Install a shower enclosure without drilling.
    2. A new toilet cover to change everything.
    3. Add bathroom faucets without masonry work.
    4. Bathroom accessories without drilling the wall.
• What is the most expensive part of a bathroom remodel?

  • When it comes to remodeling, the highest single cost is labor, which usually accounts for 20%–65% of the final cost. However, if you're looking at the tangible items within a bathroom, the wet area (tub, shower, and wall surrounds) is the most expensive part.

• How do you make a bathroom look high end on a budget?
  • 15 ways to make your bathroom look expensive
    1. Stunning stone-effect tiles and wall panels.
    2. Unique metal finishes.
    3. Statement walls.
    4. Luxurious lights for less.
    5. Add a chair or statement stool.
    6. Display your towels.
    7. Minimalism and simplicity.
    8. Freestanding bathtub.
• What is the most expensive thing about a bathroom remodel?

  • Plumbing – Moving Things Around Costs Money

    When it comes to bathroom remodeling, plumbing work is often the most complicated and costly aspect. It forms the backbone of your bathroom functions, influencing everything from your morning routine to your home's overall value.

• Can you renovate a bathroom on a concrete slab?
  • By demolishing the room, even on a concrete slab, your renovation contractor can get access to every electrical wire, water supply point, sewage waste pipes and the wall frames. From that stage things can be moved, new items added or new channels cut into the concrete for new plumbing.

• How do you concrete a bathroom wall?
  • 1. Step 1: Surface preparation. Microcement can be applied to any clean, sound surface including painted or primed drywall (smooth or textured), cement board or existing concrete walls.
    2. Step 2: Mix microcement and apply first layer.
    3. Step 3: Apply second layer of microcement.
    4. Step 4: Sand imperfections.
    5. Step 5: Apply a sealer.
• Can you run plumbing on top of concrete slab?

  • The traditional way of installing plumbing would be to cut through your concrete slab so you can lay the plumbing and connect it to your existing sewer point. This will give you the most seamless result, and the end result will be similar to if you had laid it in the slab from the beginning.