Frequently Asked Questions

FAQ

How do you clean bricks without damaging them?

The first step is to remove surface dirt and dust. You can use a vacuum dry mop or broom. Next wet the brick with warm water and a masonry sponge then use a scrub brush to wipe away any surface dirt

What are the materials and chemicals you use for cleaning?

Common Chemicals Used for Cleaning & Decontamination Guideline

• Hypochlorite (Bleach)
• Alcohols.
• Chlorine Dioxide.
• Hydrogen Peroxide & Peracetic Acid.
• Iodophor Disinfectant (Wescodyne)
• Quaternary Ammonium Compounds (Quats)
• References.

What 3 types of cleaning chemicals do we use?

There are so many cleaning supplies on the market, but all formulas ultimately fall into one of four distinct categories: detergents, degreasers, abrasives, and acids.

What chemical compounds are used in cleaning?

Types of Cleaning Compounds

Type	Uses	Examples
Mild alkali	Lightly soiled areas, softens water	Sodium bicarbonate
Strong acid	Dissolves surface mineral deposits	Phosphoric and hydrofluoric acids
Mild acid	Controls deposits, softens water	levulinic, acetic, hydroxyacetic, and gluconic acids
Solvent	Dissolves grease and oil	—

What are builders cleaning ingredients?

Builders: These ingredients are mineral salts that increase the cleaning power by raising the alkalinity or pH of a product. Baking soda (sodium bicarbonate) is a builder. Common builders include sodium carbonate, sodium metasilicate, and sodium hydroxide.

What are the 4 materials for cleaning?

12 Essential cleaning tools for household chores

• Scrub brushes. Get yourself at least one great cleaning brush.
• Toilet brush.
• Multi-purpose duster.
• Sponges.
• Vacuum.
• Spray bottle.
• Microfiber cleaning cloths.
• Broom and dustpan.

How do I clean up construction dust in my house?

Sweep and vacuum carpets and floors; Dust off surfaces such as window and door frames, and light fixtures; Remove stickers from glass surfaces; Vacuum upholstered furniture such as chairs and sofas.

What materials are needed for a cleaning services?

Essential supplies for a residential cleaning service

• Mop and bucket.
• Washable mop pads.
• Broom and dustpan.
• Cleaning brushes and scrub pads.
• Tile brush and grout brush.
• Rubber gloves.
• Shoe covers and knee pads to keep floors clean.
• Cleaning apron.

What cleaning supplies do you need to clean?

6 Basic Cleaning Products You Should Always Have On Hand, According To Experts

• White Vinegar.
• Mrs. Meyer's Everyday Cleaner.
• Baking Soda.
• Microfiber Cloths.
• Sprayway Glass Cleaner.
• All-Purpose Liquid Detergent.

How do you get rid of fine dust after construction?

Use a microfiber cloth to capture the finer dust on more hard-to-reach places like bookshelves. Use a mop to tackle the affected floors. Be sure to use the appropriate cleaner for your flooring material.

How do you clean new construction walls?

To effectively get rid of construction dust, begin with a sponge or soft-bristled brush to remove dirt from crevices. After this is completed, you can use a damp cloth and soapy water to wipe the surface down. Rinse your cloth regularly while cleaning and make sure all of the soap is removed when you're done.

Should you wash walls in a new house?

Cleaning the ceiling and walls is also a good thing to focus on. Be careful of what the surface is made of. If it is paint, glossy paint can take a good scrubbing but flat paint will need a gentler touch. For wallpaper, wipe them with a dry cloth, then give a very gentle wipe with some soapy water.

How do you deep clean a newly built house?

How do you clean a new construction home?

1. Wipe down all ceilings using a damp sponge.
2. Remove window labels.
3. Vacuum all window tracks.
4. Wash the interior and exterior of all windows.
5. Vacuum all the cupboards and drawers.
6. Put your cleaning solution in a bucket, grab some soft rags, and wipe down all surfaces.

How do you sanitize and clean walls of house we are buying?

Wash Interior Walls

Or, fill a spray bottle with an equal mix of white vinegar and water. (You can use less vinegar and more water if you prefer.) Use a sponge or microfiber cloth to wipe the surfaces clean.

How do you clean drywall dust in new construction?

How to Clean Drywall Dust on Drywall

1. With your dust mask on, lightly brush the dust off the walls with a soft broom or hand brush.
2. Wearing a dust mask, clean the drywall with the wide nozzle and/or brush nozzle on your shop vacuum.
3. For small areas, use a tack cloth to very lightly wipe off debris.

How to do post construction cleaning

How do I clean my house after remodeling?	The Ultimate 9-Step Post Construction Cleaner Checklist Conduct a Final Check with your Contractor. Tackle the Clutter Post-Project. Vacuum Thoroughly After Construction. Wipe Everything Down. Make Sure to Clean Air Vents and Filters. Address the Remaining Cleaning Tasks. Hire a Professional Cleaning Service if Required.
How do you declutter after renovation?	#1: Organize all the stuff you've set aside for the renovation and categorize them. To make your decluttering easier, organize all your stuff by category first, preferably by room. For example, you may want to set aside all items that go in the bedroom or categorize per season.
How do I get rid of dust in my house after remodeling?	Use a wet-dry vacuum to remove dust quickly and efficiently. It may take more than one pass to remove considerable dust accumulation. Watch for nails, splinters, bits of drywall, and other debris that may have been missed by the construction crew when cleaning.
Where do I start when cleaning and organizing my house?	Step 1: Start With The Living Room. Your living room is where you spend most of your time. Step 2: Move On To The Most Visible Room. Step 3: Declutter The Dining Room. Step 4: Tackle The Bathrooms. Step 5: Clean Up Your Bedroom. Step 6: Give Your Laundry Room Some Love.
How do you clean up after builders?	After Builders Cleaning Checklist for a Dust-Free Home Take Care of Carpets and Soft Furniture. Clean the Walls from Dust and Dirt Particles. Wipe and Polish Furnishings and Hard Surfaces. Clear the Ventilation System and Change Air Filters.
How do you get rid of dust after construction?	To effectively get rid of construction dust, begin with a sponge or soft-bristled brush to remove dirt from crevices. After this is completed, you can use a damp cloth and soapy water to wipe the surface down. Rinse your cloth regularly while cleaning and make sure all of the soap is removed when you're done.
What is the best cleaner for bricks?	Combine 4 cups of water with 1/2 cup of ammonia and 1/4 cup of dish soap in a cleaning bucket or large spray bottle. Apply the cleaner to the bricks. Scrub with a natural bristle brush.
Can you steam clean indoor brick floors?	Steam cleaning of brick surfaces and patio gives better and faster results. Besides, you are spared the cost of using expensive and harmful detergents and chemicals.
How do you restore old brick floors?	Scrub, clean, and seal. Chemical strip or shot blasting sealer off and reseal with water-based finish, oil-based finish or oil finish. Re-sand, re-grout, and/or grout color. Put sand in voids where it is missing in non-grouted brick installations.
How can I make my brick floor look better?	You can leave it textured, or seal it with a glossy coating. If you want to go for a real rustic look, you can leave the brick unfinished so it has a rough and textured surface. But, if you're going for a more polished look, you can have it sealed with a wax coating.
How do you clean indoor brick floors?	For regular maintenance, you just need to clean your brick floors with a mop, some warm water and some mild detergent. First, you'll need to clean up any loose dirt or debris with a thorough sweeping. Use a firm brush to get dirt out of all the nooks and crannies. You can mop with plain water for everyday maintenance.
How do you keep a construction site clean?	By utilizing dumpster rentals, covering surfaces, using a vacuum cleaner, hiring a professional cleaner, cleaning as you go, and being prepared ahead of time you can ensure that your property stays safe and clean throughout your construction project.
What do you clean construction dust with?	Here are the supplies needed for post-construction cleaning: Mop and bucket; A powerful vacuum cleaner with high-efficiency particulate air (HEPA) filter; Broom & dustpan; Rags, microfiber cloths, or paper towels; All-purpose cleaner; Glass cleaner; Dusting spray or furniture polish;
What are the 7 rules of housekeeping?	7 safe housekeeping practices hospitality brands should follow Clean up spills immediately. Spills can be very dangerous. Keep pathways and stairways clear. Look for fire hazards. Use personal protective equipment (PPE) Keep light fixtures clean. Replace damaged cleaning tools. Develop sanitisation procedures.
How do you fix grass that has been driven on?	Here's how to fix deep ruts in a customer's lawn. Remove grass from the rut. If some grass is still intact on the surface of the rut, use a shovel to cut around the edges of the rut and remove the grass. Loosen any compact soil. Fill in the rut with soil. Replace and/or sow grass.

• How do I level my lawn after trenching?
  • There are two most likely options:
    1. Carefully dig out the sod, backfill underneath it, place the sod back on top.
    2. Cut the grass, top-dress with dry topsoil, about 1/2" at a time, rake gently to lift most of the grass blades back out and level/smooth everything out.
• How do I fix ruts in my yard?

  • Using an edger, remove the grass in the center of your rut, lifting it up and setting aside. Then, loosen the soil in the rut and add in more soil if needed to bring it one to two inches above neighboring grass. Gently place the turf back into its original spot, give it a good drink, and wait for it to level.

• How do I rejuvenate my yard?
  • Steps for Revitalizing Your Lawn:
    1. Aerate the lawn using a core aerator.
    2. Sprinkle roughly ½” of compost on top of the lawn.
    3. Put the fertilizer in the spreader and apply it to the lawn.
    4. Put grass seed in the spreader and apply it to the lawn.
    5. Give everything a good watering.
• Will damaged grass grow back?

  • Dormant grass can be revived with a bit of TLC. However, dead grass will need to be resodded in order to restore your lawn. If there are easy-to-distinguish sections of green and brown in your lawn, chances are the brown or pale areas are dead and need to be resodded. After all, you can't actually revive dead grass.

• Are construction workers supposed to clean up after themselves?
  • There are no laws in the State of California that categorically assign responsibility to a contractor for post-construction cleanup.

• How do I keep my house clean during construction?

  • Seal off the Area

    One of the most effective ways to keep your home clean during a remodel is to seal off the construction area by hanging plastic sheets over the windows and doors. Dust can still find its way to the rest of the home, but most of it will remain contained in the construction area.

• How do you clean dust from construction?
  • Vacuuming it will remove most of the dust, particularly the loose material that's more likely to shift around if you tried to sweep it up. Don't vacuum in random directions. Instead, start from the ceiling and work down towards the floor, moving in long sideways movements as you go.

• How do you keep floors clean during renovation?

  • Keep the Site Clean and Well Ventilated

    Clean the floors with shop vacuums and sponge mops to prevent the spread of dust and other debris. If you're working with paints, clean up any spills as soon as possible to avoid permanent stains. It also helps to dispose of trash as you work to cut back on clutter.

• How do you clean up after construction dust?

  • To effectively get rid of construction dust, begin with a sponge or soft-bristled brush to remove dirt from crevices. After this is completed, you can use a damp cloth and soapy water to wipe the surface down. Rinse your cloth regularly while cleaning and make sure all of the soap is removed when you're done.

• How long does construction dust take to settle?
  • Particles at 5µm in diameter (respirable) will settle in about 8 minutes. Particles with a diameter of 1µm (respirable) will take up to 4 or more hours to settle.

• What does washout mean in construction?

  • Concrete washout. After concrete is poured at a construction site, the chutes of ready mixed concrete trucks and hoppers of concrete pump trucks must be washed out to remove the remaining concrete before it hardens. Equipment such as wheelbarrows and hand tools also need to be washed down.

• Is it normal for contractors to leave a mess?

  • Cleaning up a site is an essential part of checking your work. A contractor who does not clean up after themselves is akin to a writer who does not proofread what they have written. Failure to clean up properly suggests that a contractor is rushing their project.

• How do you manage concrete washout?
  • Keep washout area at least 50 feet from streets, storm drains, open ditches and streams. Contain the disposal to keep concrete from flowing down slope. Use washout area only for chutes, tools and equipment. Install storm drain protection at any inlets that are down grade from the washout.

• What is concrete washout good for?

  • Concrete washout is a designed structure in a designated area of a construction site, where all slurry concrete is washed and removed from construction equipment. Concrete washout prevents slurry concrete from leaving construction sites, thus preventing stormwater pollution.

• What causes a washout?

  • A washout is the sudden erosion of soft soil or other support surfaces by a gush of water, usually occurring during a heavy downpour of rain (a flash flood) or other stream flooding. These downpours may occur locally in a thunderstorm or over a large area, such as following the landfall of a tropical cyclone.