how much do real estate agentsmake

What Dimension Comes First When Describing Construction: A Comprehensive Guide

I. Importance of Correct Dimension Order in Construction:

  1. Accuracy: Placing dimensions in the correct order ensures precise measurements, reducing the risk of errors and rework.
  2. Efficiency: Following a standardized dimension order streamlines the construction process, saving time and resources.
  3. Clarity: Correctly ordered dimensions enhance communication among architects, engineers, contractors, and other stakeholders, minimizing misunderstandings.

II. Benefits of Knowing the Correct Dimension Order:

  1. Clear Communication: Proper dimension order facilitates effective communication between construction team members, leading to improved collaboration and project success.
  2. Compliance with Codes and Standards: Understanding the correct dimension order is vital to ensure compliance with building codes and industry standards.
  3. Accurate Material Estimation: Correctly ordered dimensions enable precise material estimations, preventing under or over-ordering of construction

Measurements always go in the following order: length x width x height.

Which dimension do you say first?

When you tell us the dimensions of the box, they need to be in this order, Length x Width x Depth.

What order do you write dimensions?

What comes first? The Graphics' industry standard is width by height (width x height). Meaning that when you write your measurements, you write them from your point of view, beginning with the width.

In what order should dimensions be given when they are part of the description?

The industry standard is to display these measurements in the order of width first, height second and depth third. For example, our Price Point Beech Panel End Desk can be shown as 1600 x 730 x 600. What this means is, the office desk is 1600mm in width (W), 730mm in height (H) and 600mm in depth (D).

What is the correct order of construction?

What is the order of construction? Construction order refers to the major sequence of work followed while constructing a building. Construction order typically starts with marking, excavation, foundation, framing, brick masonry, roofing, flooring, and finishing.

How do you read scale drawings?

The ratio is marked at the left end of the scale. For example, the scale of 1:50 means that 1 mm on the drawing represents 50 mm on the object. This means that the object is 50 times larger than the drawing of it. An object 450 mm long would be represented by a line 9 mm long (450 mm/50).

How are architectural scales read?

Ĵ Architect scales have numbers that run incrementally both from left to right and from right to left. A whole number or fraction to the left or right of the number line indicates the scale those numbers represent.

Frequently Asked Questions

How do you determine scale?

To find the scale factor, first find the corresponding sides on the two figures. Then, divide the measurement of the new figure by the measurement of the original figure. The resulting value is your scale factor, or how many times larger or smaller your new figure is compared to the original.

How do you write scaling?

The scale factor can be written as a ratio or fraction. To write the scale factor of any scaled copy to the original, find the corresponding sides and write a ratio of the original to the scaled copy. Here these two similar triangles have corresponding sides that have a ratio of 2 : 1 .

How do you write scales in architectural drawings?

Architectural drawings are made to scale, meaning that a given length on a drawing corresponds to a specific length in reality. For example, a floor plan could be drawn at a scale of 1/4" = 1'-0", meaning that each quarter inch on the drawing represents one foot of the floor plan's actual size.

How do you measure scaled drawings?

So when you're working with scale drawings:
  1. Find out what the scale on the drawing is.
  2. Measure the distance on the drawing using a ruler (or count the number of squares, if that's an option).
  3. Multiply the distance you measure by the scale to give the distance in real life.

How do you calculate scale in engineering drawing?

If a drawing is drawn HALF the actual size of the object, the scale is 1:2. This means that one unit on the page is equal to two units in real life. If a drawing is drawn DOUBLE the actual size of the object, the scale is 2:1. This means that two units are used on the drawing to represent one unit in real life.

What tool is used to make measurements and scale drawings?

A scale ruler is a tool for measuring lengths and transferring measurements at a fixed ratio of length; two common examples are an architect's scale and engineer's scale.

How are dimensions displayed on a construction drawing?

The dimension line is a fine, dark, solid line with arrowheads on each end. It indicates direction and extent of a dimension. In machine sketches and drawings, in which fractions and decimals are used for dimensions, the dimension line is usually broken near the middle to provide open space for the dimension numerals.

How do you write dimensions in a plan?

Text of the dimensions can be placed in different ways:
  1. Dimension inside the extension lines, with arrows inside or outside; and.
  2. Dimension outside the extension lines, with arrows again inside or outside.

FAQ

What are the dimensioning rules for architectural drawing?
  • Each dimension should be written clearly with only one way to be interpreted.
  • A feature should be dimensioned only once.
  • Dimension and extension lines should not cross.
  • Each feature should be dimensioned.
  • Dimension features or surfaces should be done to a logical reference point.
How do you read drawing dimensions?

First, you need to identify the dimensioning system used, which can be either the inch system or the metric system. The dimensioning system is usually indicated by a note or a symbol on the drawing. Second, you need to read the dimensions from the feature to the dimension line, and then to the extension line.

How are dimensions written in construction?

There are two basic methods of placing dimensions on a sketch. They may be placed so they read from the bottom of the sketch (unidirectional dimensions) or from the bottom and right side (aligned dimensions). The unidirectional system is usually best, because it is more easily read by workmen.

Which direction is length and width?

Length vs Width

Length is the measure of how long an object is from one end to the other, while width is the measure of how wide an object is from side to side. Height is the measure of how tall an object is from top to bottom.

Is length or width first in house plans?

Below the room label is the room dimensions. It is listed in feet and inches with the width first and the length second. Doors and windows are two of the most important elements shown on a floor plan. Each door and window is given a location and size.

Which goes first length or width?
The first dimension to measure is length. Length is always the longest side of the box that has a flap. The next dimension is width.

Does length or width come first in construction?

In construction estimating we were required to use in left-to-right order : width x length x height x quantity. In the USA we use width x height for paper ( I.e. letter size is 8 1/2 x 11 and legal size is 8 1/2 x 14).

Which direction is length?

Length is the horizontal measurement in a plane, whereas height is the vertical measurement. In Geometry, the important parameters used to describe shapes are length, breadth and height.

What dimension comes first when describing construction

How do you find the scale blueprint?

Step 2. Look for the scale, which will be located below the drawing title or somewhere on the title block. Sometimes, a drawing will provide a drafted, graphic scale, instead of a written scale. The scales will be given as a fraction of an inch equal to one foot, such as 1/4 inch equals 1 foot.

Where can the scale for a set of blueprints be found?

A set of plans may include a variety of different scales, depending upon what objects are being rendered. The selected scale normally is found in the title block in the lower right-hand corner of the drawings but may be found anywhere on the plans.

How do you calculate building scale? Set the ratio as the size of the design on the paper to the size of the design in real life. In the example, 1.5 feet to 40 feet. Evaluate the ratio to find the scale. In the example, 1.5 feet divided by 40 feet equals 0.0375, so the scale of the object is 0.0375 to 1.0.

What is the formula for the scale of a drawing?

A scale is a ratio of a length in the drawing to the corresponding length in the actual object. To find the scale used in a drawing or model, divide the drawing length by the actual length. Then write the ratio in simplest form. Hope this helps!

Is there an app for scaling blueprints?

"Being both fast and responsive, as well as intuitive to use, Archisketch might just be the app you've been searching for. Archisketch is a scale-aware sketching program ideal for Architects, interior and landscape designers, product designers, design students, or anyone working with design on an iPad.

When measuring do you say height or width first?

The orientation is dictated by which measurement has the greater value, and the standard format for denoting size is always width first, then height, or WxH.

Do you list height first or width first?

The Graphics' industry standard is width by height (width x height). Meaning that when you write your measurements, you write them from your point of view, beginning with the width.

Do you write width or height first in construction?

In construction estimating we were required to use in left-to-right order : width x length x height x quantity. In the USA we use width x height for paper ( I.e. letter size is 8 1/2 x 11 and legal size is 8 1/2 x 14).

  • What is the proper order for material measurements to be given?
    • However, the industry standard order of dimensions when recording or reading measurements remains the same: Length x Width x Depth (LxWxD) or Length x Width x Height (LxWxH). Length: The longest side when looking at the top of the box. Width: The shorter side when looking at the top of the box.

  • What does 16x20 mean?
    • 16x20 inches is a standard paper size for photographs and artwork. It is approximately 40.64 centimeters by 50.8 centime.

  • What would be the construction of a major scale
    • Here I'll be explaining how a major scale is constructed and how to use a simple formula to figure out the major scale for any key.

  • How do I show the scale of a picture?
    • Include the Human Element to Portray Scale in Your Photos

      Including a person in a photograph is the most reliable way to give a sense of scale. This is because we instinctively know how big a person is. We can make an easy comparison.

  • How do you show scale in product photos?
    • Create clear and consistent measurements

      You can use a measuring tape, a ruler, a scale, or a reference object to show the measurements in your product photos. You should also label the measurements clearly and use contrasting colors or fonts to make them stand out.

  • How can we describe the scale for a scale drawing?
    • The scale tells us what some length on the scale drawing represents in actual length. For example, a scale of “1 inch to 5 miles” means that 1 inch on the drawing represents 5 actual miles. If the drawing shows a road that is 2 inches long, we know the road is actually , or 10 miles long.

  • How do you show scale in a plan?
    • Ready your scale ruler

      If your plan was printed to 1:100, turn your scale ruler to the side that corresponds with that scaling ratio and place it on your plan. Now any measurement you take from the plan using the ruler will display the true 1:1 distance of the space.

  • What is the scale in the picture called?
    • The image scale or map scale as it is sometime called refers to the relative difference in size or distance between the image and the features represented on the ground. This difference is written as a ratio of image distance over ground distance.

Leave A Comment

Fields (*) Mark are Required