how much do real estate agentsmake

How to Clean a New Construction Home: A Comprehensive Guide for a Sparkling Clean Living Space

Cleaning a new construction home can be a daunting task, but with the right guidance, it can be a breeze. In this guide, we will provide you with step-by-step instructions, checklists, and essential tips to ensure your new home is spotless and ready for move-in. Whether you're a homeowner or a professional cleaner, this guide has got you covered.

Benefits of How to Clean a New Construction Home:

  1. Thorough Cleaning:

    • Step-by-step instructions to ensure no corner is left untouched.
    • Detailed checklists to keep track of cleaning progress.
    • Tips to tackle dust, debris, and construction residue effectively.
  2. Promotes a Healthy Living Environment:

    • Eliminates allergens and potential health hazards from construction materials.
    • Tips for using eco-friendly cleaning products to maintain indoor air quality.
    • Guidance on removing harmful chemicals used during construction.
  3. Preserves the Aesthetic Appeal:

    • Instructions to clean and maintain various surfaces like floors, countertops, and fixtures.
    • Tips for removing paint splatters, adhesive residues, and grout stains.
    • Recommendations for cleaning delicate materials without causing damage

Begin by thoroughly dusting all surfaces, including ceilings, walls, and baseboards. Pay special attention to areas prone to construction residue, such as corners, light fixtures, and window sills. For the floors, consider vacuuming or sweeping before mopping to eliminate any debris or dust.

How do you get construction dust out of your house?

There are a few simple steps you can take to ensure dust from construction work is cleaned up appropriately.
  1. Step 1: Ventilate the Room. A great way to start is to ventilate the room.
  2. Step 2: Rough Cleaning.
  3. Step 3: Deep Cleaning.
  4. Step 4: Touch-Up Clean.
  5. Step 5: Mop the Ceiling.
  6. Step 6: Mop the Walls.

How do you clean new construction walls?

If your question is how to clean construction dust from walls, you will need to wipe your walls with a soft damp towel and then wrap it around the bottom of your broom. Secure it with tape if you have to, and then push the towel along your walls to collect dust and wipe it away.

How do you clean a new construction bathroom?

The Ultimate New Construction Cleaning Checklist
  1. Clean the Ceiling First. It is always smart to start your cleaning at the top of the room.
  2. Use A Shop Vacuum.
  3. Clean the Bathtub/ Shower Stall and Sinks.
  4. Wash Windows.
  5. Dust and Vacuum Vents.
  6. Kitchen Cabinets.
  7. Finish With The Floors.

In what order should you clean a house?

Are You Cleaning Your Home in the Right Order?
  1. Start with Cleaning the Bathroom First.
  2. Up Next is Dusting and Organizing.
  3. Move on to Mopping and Vacuuming.
  4. Cleaning the Kitchen Should Be Your Final Stop.
  5. If You Don't Have the Time for Cleaning, Merry Maids® is Here!

How do you clean a new house after construction?

Clean-up steps after renovating:

Sweep and vacuum all surfaces, including ceilings and walls. Sweep, mop, and disinfect floors. Vacuum all upholstery. Wipe down doors, knobs, baseboards, moldings, and hardware.

How long does it take for construction dust to settle?

Particles less than 10 µm in diameter (thoracic) will take about 3 minutes to settle. The 5 µm diameter particles (respirable) will settle in about 8 minutes. Particles with a diameter of 1 µm (respirable) will take up to 4 hours or more to settle.

Frequently Asked Questions

How do you get construction dust out of the air?

Use an air purifier. A proper filtration system is essential, and a High-Efficiency Particulate Air (HEPA) filter will ensure that 99.7% of microscopic particles are removed from the air. Put tarps over things that will collect dust.

How do I get a cleaning contract?

How to Get A Commercial Cleaning Contract
  1. Identify Your Target Market.
  2. Market Your Cleaning Business.
  3. Make Quoting, Booking, and Paying Easy.
  4. Find Clients.
  5. Provide a Consistent Cleaning Service.
  6. Verify You Satisfied Customers' Expectations.
  7. Renew the Contracts.

What should I clean in a brand new house?

The Ultimate New Construction Cleaning Checklist
  1. Clean the Ceiling First. It is always smart to start your cleaning at the top of the room.
  2. Use A Shop Vacuum.
  3. Clean the Bathtub/ Shower Stall and Sinks.
  4. Wash Windows.
  5. Dust and Vacuum Vents.
  6. Kitchen Cabinets.
  7. Finish With The Floors.

How do most people clean a new house?

Use disinfecting cleaners for best results.
  1. Start at the Top. Start at the top of the space and move down.
  2. Wipe Down Windows and Mirrors. Use window cleaner on the glass and general-purpose cleaner for the windowsills.
  3. Clean Cabinets and Closets.
  4. Scrub the Tub and Shower.
  5. Disinfect the Toilet.
  6. Clean the Sink Area.

How do you clean a building after construction?

Make sure to clean these areas after completing a construction or renovation project:
  1. Wipe Down All Surfaces. This is the first and most obvious part of cleaning after construction.
  2. Vacuum or Clean Carpets and Upholstery.
  3. Replace Air Filters.
  4. Outdoor Pressure Washing.

FAQ

How do you clean new floors after construction?
Damp mopping the hard surface floors after the final vacuum will remove that last layer of dust. Be gentle on surfaces that are delicate like hardwood floors. Remember not to use a wet mop but something just damp enough to lightly remove the dust. Repeat this process as many times as necessary until the floor shines.

How do you get rid of builders dust?
Use a wet-dry vacuum to remove dust quickly and efficiently. It may take more than one pass to remove considerable dust accumulation. Watch for nails, splinters, bits of drywall, and other debris that may have been missed by the construction crew when cleaning.

How do I get rid of dust in my house after construction?

Sweep and vacuum carpets and floors; Dust off surfaces such as window and door frames, and light fixtures; Remove stickers from glass surfaces; Vacuum upholstered furniture such as chairs and sofas.

How do you clean a house you just bought?
Use disinfecting cleaners for best results.
  1. Start at the Top. Start at the top of the space and move down.
  2. Wipe Down Windows and Mirrors. Use window cleaner on the glass and general-purpose cleaner for the windowsills.
  3. Clean Cabinets and Closets.
  4. Scrub the Tub and Shower.
  5. Disinfect the Toilet.
  6. Clean the Sink Area.
How long does construction dust take to settle?
Particles at 5µm in diameter (respirable) will settle in about 8 minutes. Particles with a diameter of 1µm (respirable) will take up to 4 or more hours to settle.

How to clean a new construction home

How do you quote a post construction cleaner?

Post Construction Cleaning Price per Square Foot

The post construction cleaning rates per square foot range between $0.15 and $0.60, depending on the extent of the work and construction type.

Should you clean a new house? If you have the time, you should clean your new home or apartment before moving in. This will make it fresh, new and very clean for your move in day. Those without the time can hire a professional cleaning company to handle the tasks.

What is a quote for cleaning services?

The cleaning service quotation should include the details of the services you will provide, the cost of each service, and the estimated time it will take to complete the job. It should also include any additional services, price lists and fees you will charge.

How do I clean up construction dust in my house?

Sweep and vacuum carpets and floors; Dust off surfaces such as window and door frames, and light fixtures; Remove stickers from glass surfaces; Vacuum upholstered furniture such as chairs and sofas.

  • How do you deep clean a house after construction?
    • Usually, a post-construction clean up will include the following:
      1. Sweep and vacuum all surfaces, including ceilings and walls.
      2. Sweep, mop, and disinfect floors.
      3. Vacuum all upholstery.
      4. Wipe down doors, knobs, baseboards, moldings, and hardware.
  • How do I clean my house when remodeling?
    • Invest in a High-Quality Vacuum

      You'll be doing a lot of vacuuming during a remodel to keep your home clean. Vacuum floors, furnishings, and even surfaces like countertops at the end of each day to help stay on top of the dust and debris generated from construction.

  • What is the fastest way to get rid of construction dust?
    • Use a wet-dry vacuum to remove dust quickly and efficiently. It may take more than one pass to remove considerable dust accumulation.

  • What can I use to clean my new house?
    • If there is stained tile grout, you can apply a paste of baking soda and then add some vinegar, let it sit for up to half an hour, then scrub with a toothbrush. For the toilet, wipe down all surfaces with a disinfectant cleaner like vinegar or bleach.

Leave A Comment

Fields (*) Mark are Required